Sat Cruiser 201 receiver - Free to Air Satellite Forums (Asia Pacific) - Sponsored by aDigitaLife.com Audio Visual Suppliers

sinbad · 12-05-2003, 04:59 AM

I am looking for a person that is using a Sat cruiser 201 Analogue/Digital receiver.

Need someone who knows a little about this unit, the sofware upgrades etc because I purchased one from Melbourne and it is on its way to PTH in the next few days.

I intend using it to AS2 and will perhaps put an actuator on my 2.4M dish for C band.

How does itcompare to the Humax 5400 on FTATV signal quality..

What size cable do I need to for a 24 inch heavy duty actuator.....how many cores.

Does this unit come with a UHF remote or IR remote.

Sinbad

jono · 14-05-2003, 12:03 PM

Have a look at www.satcruiser.com for some info. The remote is IR and my two receivers are running ver 2.83 and 2.46 firmware. As far as the actuator is concerned you will need 4 core cable (M1,M2,sense,GND). The picture/sound is fine on mine, used to crank up the volume on CMT in the good old days no problem

.

cheers

Jono

12-05-2003, 04:59 AM	#1
sinbad Member Join Date: May 2003 Posts: 59	Sat Cruiser 201 receiver I am looking for a person that is using a Sat cruiser 201 Analogue/Digital receiver. Need someone who knows a little about this unit, the sofware upgrades etc because I purchased one from Melbourne and it is on its way to PTH in the next few days. I intend using it to AS2 and will perhaps put an actuator on my 2.4M dish for C band. How does itcompare to the Humax 5400 on FTATV signal quality.. What size cable do I need to for a 24 inch heavy duty actuator.....how many cores. Does this unit come with a UHF remote or IR remote. Sinbad

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

14-05-2003, 12:03 PM	#2
jono Junior Member Join Date: Apr 2003 Posts: 2	Have a look at www.satcruiser.com for some info. The remote is IR and my two receivers are running ver 2.83 and 2.46 firmware. As far as the actuator is concerned you will need 4 core cable (M1,M2,sense,GND). The picture/sound is fine on mine, used to crank up the volume on CMT in the good old days no problem . cheers Jono