Dreamax 470

[Mr Fog]

Bought one yesterday.In the Edit Menu (manual search) for some reason Im not able to change the frequency .Try everything- no luck.When hiting Green button(TP Edit) menu jumping back to Antenna setup, but according to the manual it's must show TP editing table.Previos receiver was set up on Asiasat 2 and new one no problem picking up signal from that bird as it does listed in satellites menu.But I would like to move dish to Express 2A and it seems to be a problem.Any ideas?:confused: Thank you.

[farmsky]

Green button gives:
1. add
2. modify
3. delete
on mine :)
Try with no antenna connection, just in case it thinks the 'dc lnb load' is too great ...... maybe. Can't think of anything else. I guess the lnb lo freq is set?

[Mr Fog]

Green button gives:
1. add
2. modify
3. delete
on mine :)
Try with no antenna connection, just in case it thinks the 'dc lnb load' is too great ...... maybe. Can't think of anything else. I guess the lnb lo freq is set?did so -still no changes.
Probability of software mulfunction very high.
wasn't my day yersteday :( Has to take it back to seller.

[Eunos500]

Hi

Check in your antenna set up menu that you setting are right.
eg
Satelite: pas 8 KU
LNB: 11300 (check your lnb specs) some are 10700.
22K: off
diseqc: off
__________________
Manual set up.
Add transponder (green button)
add transponder, enter your freq/SR/vertical OR horizontal pol.
network search on
Make sure when you add, the strength and quality bars are green and over 50%, red to scan transponder,
Channels should appear on a list with TV on left colum and radio on right.

Press menu twice to exit.
--------------------------
Good luck
Eunos500

[Mr Fog]

Thank you, all. The problem solved.

[farmsky]

Good news. What was the solution?

[Mr Fog]

Good news. What was the solution?Use wrong button:(