PDA

View Full Version : Cables/Switches

  1. Myths on diseqc
  2. Switching between 2 dishes
  3. 22 KHz switch location
  4. DiSEqC 1.2 - 2 on 1 RG6 cable??
  5. diSeqc
  6. Help with getting signal using a Diseqc Switch
  7. Coax
  8. Moteck with 22 Khz switch
  9. 4 dish's,1 with dual LNB,2 Humax,1x4 way Disq Sw.
  10. Commscope RG6 Quad Shield
  11. DisQ1.2 switch between KU / C
  12. 2 dishes, diiseqc and moteck
  13. RG6 Quad Specifications
  14. 4 fixed Dishes (C bands) to 4 STBs
  15. multiple Diseqcs
  16. Roll your own RG6/RG6U cables
  17. Diseqc Switching Examples
  18. 0/12V switch
  19. RF Injection
  20. Information on how to use a multiswitch.
  21. Diff between a diseqc 1.2 and 2.0
  22. LNB switch - how to set it up
  23. Scart, Component, S-Video Etc..........
  24. 22KHz Switch + DiSEqC 1.0 Switch ?
  25. Useful Cabling Guide
  26. Digital Coaxial Audio Cable
  27. 2 dish + 2 receivers help needed
  28. 2 dishes, one motorised.
  29. Diseqc switch insertion loss
  30. 22k tone switch not work, Help!
  31. 2 dish one reciver help
  32. DiSEqC 2.0, 1.2, 1.0
  33. 2 positioner, or 2 diseq in series....
  34. Humax 5400 Diseqc 2.0 Compatibility
  35. Four way splitter help....
  36. Some advice please
  37. Advice on Line AMP 20db
  38. again 2 dishes, one motorised.
  39. 5 LNB's and 2 STB's
  40. 2 Dishes 3 Receivers
  41. Combining signals in 1 cable
  42. 2 dual lnb 2 receivers
  43. DiSEqC Switch Connection
  44. RS 232 CABLE INNER CONNECTION FOR FUJITSU IC UPGRADE SOFTWARE DOWNLOAD FOR RECEIVER
  45. diseqc suddenly stopped working.
  46. switches?
  47. lnb need help.
  48. Damaged cable
  49. Is this correct
  50. DISEQC Issues
  51. DiseqC, 22 Khz Swith issues with ID Digital
  52. Alternative AV Cable
  53. Coax Protector SE-1
  54. Diff between a splitter and a tap
  55. Will it work
  56. 2 Way tone switch
  57. What switch to use
  58. Spaun 210F info reqd
  59. 22Kz switch
  60. Diseqc Switches- a 6 way
  61. IF AMP to boost signal along 30 meter cable
  62. Diseqc Switches
  63. Many Satellites to multiple receivers
  64. 2 motorised dishes one box
  65. Two actuators, one Vbox?
  66. external lnb supply
  67. DiSEqC Switch Connection
  68. 25 Meters long Down Lead
  69. Automatic Distribution Switch
  70. Connecting 2 sats on the same receiver
  71. Determing the quality of co-axial cable
  72. Suppliers for Cable, Connectors, Tools
  73. One dish to two receivers
  74. Incorporating a Yuri LNB into Existing Setup
  75. Price of RG11
  76. DisEqc 4X1 switch with 2X1 switch
  77. 5 cores actuator cable
  78. S-VHS PIN MINI DIN PLUG wiring
  79. loosing approx. 40% signal with diseqc switch.
  80. Cabling question (.jpg diagram provided!)
  81. How do u set DiSEqC-22hz uec660-720
  82. Spaun Switches
  83. Problems with 22hz switch
  84. 22khz and Diseqc problem
  85. diseqc switch question
  86. Single Dish to 2 Receivers
  87. Motorised ku & c band problems
  88. 12V switch
  89. DiSEqC 2.0
  90. RS 232 cable
  91. Diseqc Setup Question
  92. need another switch but what make?
  93. Toppy 4xDiSEqC setup
  94. Splitting C band dish to more than 1 reciever
  95. humax 5400 + 4to1 diseqc switch
  96. Any difference?
  97. Cable RG 6-DUO
  98. lnb multiswitch
  99. 0/12V switch in NZ
  100. Switch box 2 way with F connectors or a better setup option?
  101. Satellite cables underground?
  102. Splitters with Power Pass to All Ports
  103. Two receivers and four dishes switching
  104. Receiver To PC
  105. Sat/IF splitter - can it be used on F*xtel/Opt*s cable?
  106. 4 Satellite dishes - 3 STB's
  107. H-H motor with 2 recievers
  108. 2recievers with 1 dish on H-H motor
  109. diseqc 4x1 problem
  110. Scart to Component + LR audio cable
  111. 4 Way diseqC switches - 2.0 Protocol
  112. switch for fixed c-band and ku-band dish
  113. Satellite dish installation &Cabling licences in South Australia
  114. Sat/Cable/FTA in one RG6
  115. f-connector in a cable
  116. Multiswitch question
  117. DiseqC 2.0 4x1
  118. Correct Rs232 cable For PSI Dmove DP-303 stb Please help if possible!
  119. 3 dishes to 3 decorders interchangable???
  120. Topfield TF5000ci & DiseqC 2.0 support
  121. 4 in 6 our multiswitch
  122. 4X Diseqc switch
  123. diseqc fault??
  124. 13V/18V switch
  125. Spltiing behind the lan/cam
  126. 'RS232'
  127. Connecting satellite to 2 TV's?
  128. Can we connect C & KU LNBS to SPAUN SMS 91609 NF Multiswitch ?
  129. FTA + Cband down the same line
  130. 10db line amplifier
  131. 4lnb with 2 receivers
  132. which cable to choose?
  133. 13/18 V - 0-22KHz switch
  134. Dish switching
  135. Adding a DVBS2 USB Rx to existing system
  136. 2x Diseqc
  137. where am i going wrong
  138. Diseqc switch conflict
  139. how to connect 2 lnb - 2 receivers?
  140. Cheap Homemade Diseqc Switch Tester 4 way
  141. Satellite Finder
  142. 200m LNB to Receiver Installation
  143. wall plate ?
  144. Universal LNB With Disqec
  145. 4-Way Diseqc problem
  146. One Reciever driving C-Band and SuperJack Ku.
  147. DiSEqC and 22k tone switch setup.
  148. 8 in 12 out Multiswitch configuration for decoder
  149. Iwave diseqc switches - any good????
  150. diseqc confusion
  151. Diseqc versus positioner - problem
  152. Do Multiswitches that only work on Diseq exist?
  153. FSJ1-75
  154. Diseqc and Sat Card
  155. SCART to Composite question